Compare

Help choosing the right
Draco for you.

Watch the film

UVify Draco

Draco Models

Although Draco models are based on the same platform, there are some differences between the two. Find out more below.

Draco
$699
Analog video works with wide range of accessories
Best for beginner pilots
Best for budget
BUY NOW
UVify Draco HD

Technical Specifications

Side by side comparison of technical specifications

Aircraft
DRACO
  • Highly crash resistant polycarbonate plastic composition
  • Matte black finish (colors will be available)
  • 4k twill carbon chassis
  • 240mm motor to motor wheelbase
  • 485g/1.07lbs weight (no battery)
  • Modular componentry, no soldering required
  • Upgradeable to HD
DRACO HD
  • Highly crash resistant polycarbonate plastic composition
  • Matte black finish (colors will be available)
  • 4k twill carbon chassis
  • 240mm motor to motor wheelbase
  • 485g/1.07lbs weight (no battery)
  • Modular componentry, no soldering required
Intelligent Racing Battery
DRACO
  • 4S high-density lithium polymer
  • 1800mAh capacity
  • 65C continuous discharge, 100C burst
  • Onboard current sensor
  • Onboard charging and balancing circuits
  • Memory capability, monitor lifespan and performance over time
  • Gauge indicator
  • On/Off power control
  • 207g/0.46lbs weight
DRACO HD
  • 4S high-density lithium polymer
  • 1800mAh capacity
  • 65C continuous discharge, 100C burst
  • Onboard current sensor
  • Onboard charging and balancing circuits
  • Memory capability, monitor lifespan and performance over time
  • Gauge indicator
  • On/Off power control
  • 207g/0.46lbs weight
Motors
DRACO
  • Direct drive 3-phase brushless DC motor
  • 2206 stator size
  • 500W continuous
  • 2300RPM/V
  • 7mm high temperature neodymium arc magnets
  • 0.15mm steel stator laminations
  • 5mm titanium hollow shaft
  • 12/14 pole design
  • Up to 6S capable
DRACO HD
  • Direct drive 3-phase brushless DC motor
  • 2206 stator size
  • 500W continuous
  • 2300RPM/V
  • 7mm high temperature neodymium arc magnets
  • 0.15mm steel stator laminations
  • 5mm titanium hollow shaft
  • 12/14 pole design
  • Up to 6S capable
Speed Controller
DRACO
  • 30A brushless electronic speed controller
  • 60A burst rating
  • Up to 6S input
  • Active braking RPM control
  • Temperature monitoring
  • Field-oriented control algorithm (FOC) capable
DRACO HD
  • 30A brushless electronic speed controller
  • 60A burst rating
  • Up to 6S input
  • Active braking RPM control
  • Temperature monitoring
  • Field-oriented control algorithm (FOC) capable
Prop
DRACO
  • 5 inch 2 blade propeller
  • Designed for efficient flight
  • Polycarbonate plastic composition
  • Easy replacement
  • Approximately 1200g of thrust per propeller
DRACO HD
  • 5 inch 2 blade propeller
  • Designed for efficient flight
  • Polycarbonate plastic composition
  • Easy replacement
  • Approximately 1200g of thrust per propeller
Flight Controller
DRACO
  • 32-bit MCU
  • SPI to sensors
  • Serial connection to receiver
  • GPIO available
  • Compatible with many open-source firmwares
  • Modular
DRACO HD
  • 32-bit MCU
  • SPI to sensors
  • Serial connection to receiver
  • GPIO available
  • Compatible with many open-source firmwares
  • Modular
Sensors
DRACO
  • 6-axis IMU (gyro and accelerometer)
  • Industrial vibration isolation
  • SPI interface
  • Up to 32kHz update rate
  • Modular
DRACO HD
  • 6-axis IMU (gyro and accelerometer)
  • Industrial vibration isolation
  • SPI interface
  • Up to 32kHz update rate
  • Modular
Video Transmitter
DRACO
  • 5.8GHz analog video transmission system
  • Up to 40 available channels (country dependent)
  • Variable power output (<1mw, 25mW, 200mW, 600mW)
  • Pit mode available, allowing powering without transmitting
  • No perceivable latency
  • Standard SMA connection
  • Pagoda omnidirectional circularly polarized video antenna
  • Modular with Video Overlay System
DRACO HD
  • 5.8GHz digital video transmission system
  • Up to 40 available channels (country dependent)
  • Variable power output
  • Pit mode available, allowing powering without transmitting
  • No perceivable latency
  • Modular with Video Overlay System
Video Overlay System
DRACO
  • 32-bit double buffered full VGA resolution
  • PAL and NTSC compatible
  • Allows full configuration of the following through FPV feed
    • VTx settings
    • Draco FC settings
    • OSD settings
    • Camera settings
  • Custom logo
  • Modular with Video Transmitter
DRACO HD
  • Full 720p resolution
  • PAL and NTSC compatible
  • Custom logo
  • Modular with Video Transmitter
Camera
DRACO
  • Sony ⅓” Super HAD II CCD 600TVL
  • 2.5mm Lens
  • Adjustable angle (0/20/40/60 degrees)
  • Wide Dynamic Range
  • Low light capable
  • Modular
DRACO HD
  • 720p30 HD Camera, with high-dynamic range (HDR) sensror
  • 2.8mm or 1.4mm Lens (HP+ Lens)
  • Adjustable angle (0/20/40/60 degrees)
  • Low light capable
  • Modular
LED Lighting
DRACO
  • Fully addressable WS2812 RGB LEDs (front and back)
  • Control via flight controller
  • Selectable RGB LEDs (arms)
  • Light diffusion covers
DRACO HD
  • Fully addressable WS2812 RGB LEDs (front and back)
  • Control via flight controller
  • Selectable RGB LEDs (arms)
  • Light diffusion covers
Charger
DRACO
  • 16.8V 2A Output
  • 33.6W
  • ~1C charge rate for extended lipo life
  • Charges Draco 1800mAh lipo in ~1 hour
DRACO HD
  • 16.8V 2A Output
  • 33.6W
  • ~1C charge rate for extended lipo life
  • Charges Draco 1800mAh lipo in ~1 hour

Frequently Asked Questions

Answers to your questions

If I buy a Draco can I upgrade to HD at a later date?

Absolutely! We’ve designed Draco with upgradability in mind. You can upgrade your Draco to a Draco HD yourself by purchasing one of our HD upgrade kits on the store. The kit includes everything you need to make your existing Draco into a Draco HD without the need of buying a completely new drone.

What do I need to get flying?

Draco

Draco comes in an Almost ready to fly (ARTF) package. Simply bind to your existing transmitter (Transmitter not included) and a set-up your FPV goggles so they are on the same channel as Draco for video output.

Draco HD


Draco HD comes in an Almost ready to fly (ARTF) package. Simply bind to your existing transmitter (Transmitter not included) and pair with a ProSight Receiver (Sold Seperately). You then need to plug your FPV Goggles into the ProSight receiver using a HDMI Cable.

Is Draco beginner friendly?

Draco is suitable for all skill levels, including beginners. You can completely customize the flight characteristics of Draco using the UVify Configurator.

What types of Receiver does Draco support?

At present, Draco can be purchased with a DSMX Receiver or a Turnigy Evolution Receiver.